Cross Country · Marathon · Handcrafted Carbon
The Darimo Epsilon MTB integrated handlebar maintains the characteristic lightness of our products with only 148 g for a 60mm stem, made entirely from carbon fiber with an exclusive combination of bidirectional and unidirectional fabrics.
The correct arrangement of fiber layers has been achieved through finite element calculations and destructive testing. Thanks to our iterative test-improvement process, we have achieved improved stiffness and product safety without affecting the final weight.
Each layer is placed by hand and precisely adjusted. The number and orientation of layers varies in each zone to optimize stiffness, absorption and strength.
FEM calculations and destructive testing ensure optimal fiber arrangement of UD and bidirectional fabrics for maximum stiffness with minimum weight.
Ready for internal cable routing with 10mm holes. Compatible with Garmin/Wahoo mounts and steerer tube adapters.
Not all angle and length combinations are available. Check the table:
| Angle | 50mm | 60mm | 70mm | 80mm | 90mm | 100mm |
|---|---|---|---|---|---|---|
| -6° | — | — | — | ✔ | — | — |
| -12° | ✔ | — | ✔ | ✔ | — | — |
| -17° | ✔ | ✔ | ✔ | — | ✔ | — |
| -25° | ✔ | — | — | ✔ | — | — |
Available backsweep: 6° or 9°
Epsilon MTB technical data
| Handlebar width | 740 mm |
| Backsweep | 6° / 9° |
| Steerer tube diameter | 1 1/8" |
| Clamp area height | 33 mm | Available angles | -6°, -12°, -17°, -25° |
| Stem lengths | 50, 60, 70, 80 mm, 90 mm, 100 mm |
| Material | UD + Bidirectional carbon fiber |
| Hardware | Titanium |
| Internal nuts | Aluminum |
If you need your handlebar to be reinforced, select it in the specifications before purchasing. This modification adds some weight.
The ends have internal reinforcements; cutting it compromises structural integrity and voids the product warranty.
Ready for full cable integration. 10mm holes near brake levers. Exit through front of steerer tube or internally. External routing option available.
Ready for two-bolt mounts (adjustable distance). Adapter plates available for Garmin and Wahoo.
For D-shaped tubes, specify the model in comments. We have adapters for most frames with cable integration.
Predefined positions for Di2 holes available. If you need different positions, indicate in order comments.
Custom manufacturing is available: special reinforcement, layer adjustment, aesthetic modification or specific configuration on request.
Each unit is handcrafted, allowing exclusive adaptations. Contact us for special requests.